1. Configuration

The following sections discuss configuration issues for customizing operation of ToolBox Apprentice.

Changing AUDTBX.INI: Describes the purpose, structure and editing of the Microsoft Windows AUDTBX.INI files.
ToolBox Apprentice Settings: Describes changes to the Microsoft Windows AUDTBX.INI file and when to make them.
      1. AUDTBX.INI Settings

        2. ToolBox Apprentice reads settings from the AUDTBX.INI file every time you start ToolBox Apprentice. You can make changes directly to your AUDTBX.INI file by using any ASCII text editor. If using a word processor, be sure to save the file as an ASCII text file (unformatted).

        When you edit AUDTBX.INI you will see a series of sections that appear in the following format:

        [section name]
        keyword1=setting1 setting2 ...
        keyword2=setting1 setting2 ...

        The section name precedes the setting for a particular Windows setting or application. The parameters for Screen Position, for example, are preceded by"[Screen Position]".

        VISI technical staff may ask that you refer to an item on the following list during a support session. The following list itemizes profile sections and key strings and is for reference purposes only.

        1. [Edition]

          2. Manufacturer =

        2. [Screen Position]

          3. WindowState =

          PositionLeft =

          PositionTop =

        3. [Tab Position]

          4. Active Folder =

        4. [Audio Conversion]

          5. Dynamic Compressor / Expander =

          Dynamic Compress / Expand Level =

          Normalize =

          Percent Over Range =

          Volume Adjust =

          Guard Time =

          Auto-Crop =

          Backup =

          Destination Frequency =

          Destination Data Type =

          Destination Audio File=

          Source Audio File =

          Source Data Type =

          Source Frequency =

          EqualizerBand0 =

          EqualizerBand1 =

          EqualizerBand2 =

          EqualizerBand3 =

          EqualizerBand4 =

          EqualizerBand5 =

          EqualizerBand6 =

          EqualizerBand7 =

          Swap Input =

          Swap Output =

          Byte Position =

          Byte Length =

          Configuration Global =

          Configuration Input =

          Configuration Output =

        5. [Index Rebuild]

          6. Begin at Index # =1

          Replace Text with File =

          Replace Vox with File =

          Delete Count =

          Insert Count =

          Frequency =

          Backup =

          Destination Index File =

          Source Index File =

        6. [Index List]

          7. Source Index File =

          Header Information Inhibit =

          Text Listing Inhibit =

          Audio Information Inhibit =

        7. [Index Chop]

          8. Source Index File =

          Text Extension =

          Vox Extension =

          Number of Indexes =

          File Name Offset =

          Begin at Index# =

        8. [Index Pack]

          9. Frequency =

          Sort Order =

          Text Source =

          Destination Index File =

          Source Vox File =

        9. [Sound Chop]

          10. Sound Threshold =

          Destination File Extension =

          Guard Time =

          Source Frequency =

          Source Data Type =

          Source Audio File =

        10. [Audio ToolBox]

          11. Command Line Batch File =

        11. [Environment Options]

          12. Program Files =

          Execution Mode =

        12. [Module Verification]

(file name of software module) =